Camera device guide for Android

The Camera device type is implemented using two traits: PushAvStreamTransport, which handles audio and video stream transport using push-based protocols, and WebRtcLiveView, which provides the ability to control livestreams and talkback. The Doorbell device type, for those implementations that have camera capabilities, also uses these traits.

Home APIs Device Type Traits Swift Sample App Use Case

Camera

GoogleCameraDeviceType

home.matter.6006.types.0158

A device that captures still images or video. Cameras may feature accessible livestreams, two-way talkback, or detection events.

 Required Traits
     google PushAvStreamTransportTrait
     google WebRtcLiveViewTrait

 Camera

Doorbell

GoogleDoorbellDeviceType

home.matter.6006.types.0113

A device actuated by a button outside a door that makes an audible and/or visual signal, used to request the attention of a person who is somewhere on the other side of the door. Doorbells may feature accessible livestreams, two-way talkback, or detection events.

 Required Traits
     google PushAvStreamTransportTrait
     google WebRtcLiveViewTrait

 Doorbell

Start a livestream

To start a livestream, send the Session Description Protocol (SDP) string to the WebRtcLiveView trait's startLiveView() method, which returns a WebRtcLiveViewTrait.StartLiveViewCommand.Response containing three values:

  • The SDP for the session.
  • The session duration in seconds.
  • The session ID, which may be used to extend or terminate the session.
suspend fun getWebRtcLiveViewTrait(cameraDevice, cameraDeviceType) {
 return cameraDevice.type(cameraDeviceType).trait(WebRtcLiveView).first {
    it?.metadata?.sourceConnectivity?.connectivityState == ConnectivityState.ONLINE
  }

}

// Start the live view
suspend fun startCameraStream(trait: WebRtcLiveView,offerSdp: String) {
  val response = trait.startLiveView(offerSdp)
  // Response contains three fields (see below)
  return response
}
  ...

// This is used to manage the WebRTC connection
val peerConnection: RTCPeerConnection = ...

   ...

val startResponse = startCameraStream(sdp)
val answerSdp = startResponse?.answerSdp
val sessionDuration = startResponse?.liveSessionDurationSeconds
val mediaSessionId = startResponse?.mediaSessionId

peerConnection.setRemoteDescription(SessionDescription.Type.ANSWER,
                                    answerSdp)

Extend a livestream

Livestreams have a preset duration after which they expire. To lengthen the duration of an active stream, issue an extension request using the WebRtcLiveView.extendLiveView() method:

// Assuming camera stream has just been started
suspend fun scheduleExtension(trait: WebRtcLiveView, mediaSessionId: String, liveSessionDurationSeconds: UShort ) {
  delay(liveSessionDurationSeconds - BUFFER_SECONDS * 1000)
  val response = trait.extendLiveView(mediaSessionId)
  // returns how long the session will be live for
  return response.liveSessionDurationSeconds
}

Enable and disable recording capability

To enable the camera's recording capability, pass TransportStatusEnum.Active to the PushAvStreamTransport trait's setTransportStatus() method. To disable the recording capability, pass it TransportStatusEnum.Inactive. In the following example, we wrap these calls in a single call that uses a Boolean to toggle the recording capability:

// Start or stop recording for all connections.
suspend fun setCameraRecording(isOn: Boolean) {
  val pushAvStreamTransport = getPushAvStreamTransport
  if(isOn) {
    pushAvStreamTransport.setTransportStatus(TransportStatusEnum.Active)
  } else {
    pushAvStreamTransport.setTransportStatus(TransportStatusEnum.Inactive)
  }
}

Check to see if recording capability is enabled

To determine if a camera's recording capability is enabled, check to see if any connections are active. The following example defines two functions to do this:

// Get the on/off state
suspend fun onOffState(cameraDevice: HomeDevice, cameraDeviceType) {
  // Query the device for pushAvStreamTransport
  val pushAvTrait = getPushAvStreamTransport()
  return pushAvTrait.recordModeActive()
}

// Check to see if the camera's recording capability is enabled
fun PushAvStreamTransport.recordModeActive(): Boolean {
  return currentConnections?.any { it.transportStatus == TransportStatusEnum.Active } ?: false
}

Another way to check is using the findTransport() function with a predicate:

// Fetch the current connections
suspend fun queryRecordModeState(cameraDevice: HomeDevice, cameraDeviceType) {
  val pushAvStreamTransport = getPushAvStreamTransport()
  return pushAvStreamTransport.findTransport().let {
      it.transportConfigurations.any { it.transportStatus == TransportStatusEnum.Active
    }
}

Start and stop talkback

To start talkback, call the WebRtcLiveView trait's startTalkback() method. To stop, use stopTalkback().

// Make sure camera stream is on
suspend fun setTalkback(isOn: Boolean, trait: WebRtcLiveView, mediaSessionId: String) {
  if(isOn) {
    trait.startTalkback(mediaSessionId)
  } else {
    trait.stopTalkback(mediaSessionId)
  }
}